• DC12V 100mA Environmental Monitoring Unit With Alarm
  • DC12V 100mA Environmental Monitoring Unit With Alarm
  • DC12V 100mA Environmental Monitoring Unit With Alarm
  • DC12V 100mA Environmental Monitoring Unit With Alarm
DC12V 100mA Environmental Monitoring Unit With Alarm

DC12V 100mA Environmental Monitoring Unit With Alarm

Product Details:

Place of Origin: China
Brand Name: ESTEL
Certification: ISO
Model Number: EA8016001

Payment & Shipping Terms:

Minimum Order Quantity: 1PC
Price: Depending on Order Quantity
Packaging Details: Carton
Delivery Time: 15 days
Payment Terms: L/C, T/T
Supply Ability: 20000PCS per month
Get Best Price Contact Now

Detail Information

Power Supply: DC8-15V Waiting Current: 11mA DC12V
Capacity Of Anti Disassembly Contact: 1A DC12V Relay Capacity: 100mA 12V, 30 Ω Resistance In Series
Calculator: Microprocessor Control Alarm Relay Output: Solid Relay, Normally Closed Contact
Warm-up Time: Immediately Indicator Lamp: Red LED Is On For 3 Seconds After Alarm
High Light:

100mA Environmental Monitoring Unit

,

DC12V Environmental Monitoring Unit

,

environmental rack monitoring unit

Product Description

DC12V 100mA Environmental Monitoring Unit With Alarm

 

 

Outdoor Telecom Cabinet Shock Sensor 12VDC Digital Vibration Detector

With Alarm Relay Output And Microprocessor Control

 

Model: EA8016001

 

 

Function

 

The digital vibration inductive detector, equipped with microprocessor control, alarm triggering can be achieved by a single vibration amplitude, or by accumulating multiple vibration signals of different sizes within the time limit. The weak vibration signal will be shielded, but not accumulated to generate alarm. Only strong vibration or multiple times vibration will be considered as effective signal and stored in pulse counting memory. At the same time, it can set the sensitivity manually to ensure that the best working point can be set according to the environmental conditions - to prevent false alarm without reducing the sensitivity.

 

 

Wiring

 

Power terminal connected to 12V DC power supply

Alarm output connected to normally closed zone of alarm host

Anti disassembly output connected to normally closed zone of alarm host

 

 

Adjust sensitivity

 

First, turn the sensitivity potentiometer anticlockwise to the end. At this time, the sensitivity is the lowest. Slowly rotate VR clockwise to increase the sensitivity. Knock the protected surface (simulated attack force) at each sensitivity setting point, and pay attention to whether notice if the red light is on. If the red light is on for two seconds, it indicates an alarm. This sensitivity point is the correct setting point, and then try again knock with less force to test whether the sensitivity is too high.

 

The jumper cap on the circuit board of the detector is a high and low sensitivity regulator, which is high sensitivity when closing and low sensitivity when opening.

 

 

Specifications

 

Inductive device Vibration sensor
Calculator Microprocessor control
Alarm relay output Solid relay, normally closed contact (about 30 ohm internal resistance), maximum 100mA / 30V, open circuit in case of alarm. Normally open output model can be optional
Relay capacity 100mA 12V, 30 Ω resistance in series
Sensitivity setting Continuously adjustable
Warm-up time Immediately
Anti disassembly Normally closed contact, open the cover open circuit
Capacity of anti disassembly contact 1A DC12V
Indicator lamp Red LED is on for 3 seconds after alarm
Power supply DC8-15V
Waiting current 11mA DC12V
Working temperature -20~50℃
Shell White flame retardant PVC
Dimension 26×85×24mm, W×H×D
Weight 50g

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fixing and installation

 

 

Disassembly and combined installation

 

1. Remove the panel

 

Insert a small paper cutter or screwdriver to the gap beside the screw cover (see Figure 1), gently pry up the screw cover, loosen the screw, and then separate the surface cover and the bottom cover (see Figure 2)

 

DC12V 100mA Environmental Monitoring Unit With Alarm 0

2. Combination cover

 

Place the screw in the screw pit, then tighten the screw and carefully close the cover.

 

 

3. Installation

 

Fix the vibration detector to the protected surface.

 

DC12V 100mA Environmental Monitoring Unit With Alarm 1

 

Pictures

 

DC12V 100mA Environmental Monitoring Unit With Alarm 2

 

DC12V 100mA Environmental Monitoring Unit With Alarm 3

Want to Know more details about this product
I am interested in DC12V 100mA Environmental Monitoring Unit With Alarm could you send me more details such as type, size, quantity, material, etc.
Thanks!
Waiting for your reply.